Embroidered patches can be dated all the way back to ancient Asian civilizations; they have existed for centuries. Yet not until recently has it been possible to place them to your clothing using a hot iron and heat-activated glue. With today’s patches you can readily apply them of all fabrics without ever needing a needle and thread. Thankfully having the capacity to affix them with a hot iron implies that the fingers are not going to get sore and it is much simpler and quicker to do. The only issue is, you can’t iron patches to leather – at the very least in the traditional sense.
When you’re using a hot iron to connect embroidered patches you’re essentially warming up the glue on the back side till it reaches a semi liquid, tacky state. That will require a lot of heat; heat that can damage the sensitive finish of leather.
It’s correct that leather is definitely a durable material, nevertheless the surface is comfortably damaged by concentrated heat sources. This presents two problems. The initial problem is the fact when the leather is damaged, the glue will not stay with it and so the patch will fall off. And when the patch does fall off, the leather will likely be left with an ugly mark where the iron has burned it. Exactly the same can probably be said for vinyl and various types of faux leather. One more thing to consider is the fact even when you might try to create the glue adhere, one slip from the iron which brings in contact with bare leather will leave a burn mark. This is why you ought to have never a hot iron anywhere near your leather.
We said earlier that you simply can’t work with an iron to place embroidered patches to leather in the traditional sense. The explanation for saying it is because that although you must not try to place iron on patches to leather inside the traditional way but there’s a non-traditional method. What this means is there is special glue that you can use together with an unheated iron. Yes, a smeynb iron. It are only important to apply your iron as being a press.
In order to get this to work properly, you will have to have special glue; leather is notoriously difficult to work with which means you won’t be able to use just any old glue. You can find this specialized glue at craft stores, sewing shops, and also some high-end leather goods specialty stores. Just be certain you carefully browse the directions on the bottle, ensuring that use on leather products is specifically mentioned. Failure to do this could suggest that you’re just going to be wasting your money.
The glue must be put on the back of the patch depending on the instructions on the bottle and then you should carefully place the patch to the area of the leather that you need it. Next thing you need to do is make use of cold iron to press down firmly onto the patch for the quantity of time mentioned previously on the glue bottle. After that you can release the iron and wait for the glue to dry. It’s essential that you know where you want to have your patch before you decide to lay it down. You may be left having an ugly stain should you take away the patch after you may have placed it to the leather.